Outdoor furniture sets are an excellent way to bring life to any backyard or patio. But, over time, our beautiful furniture sets will deteriorate and need a little TLC. Typically, patio chairs and cushions are the first to go. So, how can you fix sagging patio chairs?
You can fix sagging patio chairs by replacing any mesh or vinyl straps. Better, you can prevent sagging chairs by acting early and reinforcing your furniture with materials such as plywood or simply bringing them inside. Sagging patio furniture is typically caused by damage from natural elements.
Sagging patio chairs aren’t comfortable and look unsightly. Luckily, repairing outdoor furniture can be a breeze. In this article, we’ll guide you through what you need to know about fixing sagging chairs. Read on for more information!
Is There a Fix for Sagging Patio Chairs?
Sagging patio chairs are usually the first sign of deterioration when it comes to outdoor furniture. Learning to repair and fix sagging chairs is a necessary skill for anyone who owns outdoor furniture. Different materials will require different solutions, so it’s vital to understand your materials.
For example, vinyl chairs will need new straps and require a lot of effort. Alternatively, mesh chairs can be incredibly easy to fix and replace. Other chairs may not require new materials and may need to be reinforced.
You can fix sagging patio chairs quite easily. With products like Furniture Fix Sets (on Amazon) and replacement vinyl straps (also on Amazon), you can repair nearly any piece of furniture. However, the best solution is one that works long-term. That’s where preventing patio furniture from sagging comes in.
How Can I Prevent Patio Furniture from Sagging?
Regularly replacing and fixing sagging patio furniture can be a headache. Although the process is straightforward, it can be timely and inconvenient. Luckily, there are ways you can prevent your outdoor furniture from sagging.
Act as Early as Possible
The easiest way to prevent your patio furniture from sagging is by acting early. Taking care of any wear and tear early on will prevent damage from building up. Regularly cleaning, sealing, and caring for your patio furniture is the easiest way to prevent it from sagging.
Reinforce Your Furniture
Alternatively, you can reinforce your patio furniture to prevent them from sagging. To do so, you can use products like Furniture Fix Set to lift and hold your furniture.
Use Plywood Under Your Furniture
You can also reinforce your patio furniture sets with plywood. To do so, measure and cut out a piece of plywood that will fit under your outdoor furniture.
Simply place the measured plywood under your patio chair, propping it up and preventing further sagging.
Purchase Replacement Parts
Having replacement parts on hand is another way you can prevent your patio furniture from sagging. Readily available parts allow you to act immediately, preventing any damage from getting worse.
These replacement parts could be products like Zero Gravity Chair Replacement Cords (on Amazon) or extra vinyl straps. Other parts may include different fabrics for cushions, cushion foam, or various mesh slings.
Take Your Patio Furniture Inside
One way to prevent damage from building up over time is by bringing in your outdoor furniture when it’s not in use. Properly storing your outdoor furniture sets protects them from natural elements and harsh conditions.
You can store your patio chairs in your garage, shed, or anywhere else. We highly recommend you bring your patio furniture inside during harsh weather conditions.
Use Protective Coverings
Using protective coverings will act as another layer of defense for your patio furniture. Protective coverings prevent debris, moisture, and other damage from building up. Sagging patio furniture is the result of too much damage and not enough care. You can find protective coverings (on Amazon) for incredibly affordable prices!
These are just a few of the ways you can fix sagging patio furniture. Reinforcing your outdoor furniture provides it with more strength, allowing it to last for longer. Acting early and taking preventive measures will ensure your patio furniture sets last as long as possible.
If necessary, you can always take your furniture to a professional. As always, be sure to follow all instructions and guidelines provided by the manufacturer.
How Do I Fix a Sagging Vinyl Patio Chair?
Each piece of vinyl patio furniture will be different, requiring precise materials and tools. However, there are some general rules of thumb you can follow when fixing a sagging vinyl patio chair. Here’s a quick list of what you might need to get you started:
- Cloth measuring tape
- Handheld drill
- Vinyl straps
- Boiling water
Keep in mind: this process is simple and straightforward. However, replacing sagging vinyl chairs can be incredibly time-consuming. This process may take a full weekend to complete.
Step-by-step Guide on Fixing Sagging Vinyl Patio Chairs
Step 1: Remove any old and saggy vinyl straps. Do so by cutting each of them in the middle and unwrapping them from the frame. The vinyl straps should come off quite easily. However, if there are any rivets or screws attached, you may need to remove those as well. You can use a pair of ordinary household scissors to cut the vinyl straps.
Step 2: Next, you’ll need to determine the size in which to cut your new vinyl straps. To do so, measure the distance from hole to hole on your chair frame with a cloth measuring tape. Take that measurement and use it to cut out a piece of vinyl. From there, you can use that strip of vinyl as a tester. This strip of vinyl will allow you to determine precise measurements later on.
Step 3: After you have the correct measurements, you can begin cutting the vinyl straps. To do so, measure out the length and use a pair of scissors. Be sure you have the correct length before cutting all the strips to avoid any headaches down the line.
Step 4: From there, you’ll need to drill holes at the ends of the vinyl straps. You can use any handheld drill of your choice. Keep the holes about half an inch from the edge of your chair’s frame. Then, you can use the scissors to trim the corners of both sides of the vinyl straps. You can also use a saw or chisel to trim off any excess metal or plastic.
Step 5: Next, you’ll want to insert your cut vinyl strap into boiling water. This process loosens them up and allows them to stretch over your chair. You only need to let them soak for a few minutes, but it’s best to check with any and all manufacturer instructions before beginning.
Step 6: Now, you can use a pair of tongs to remove a strap from the boiling water and immediately dry them with a clean rag or towel. To be extra safe, be sure to wear gloves or something to protect your hands. After that, you can use your thumb to insert a peg through the vinyl strap and attach it to a hole on the chair frame.
Step 7: Afterwards, you’ll want to wrap the strap around your chair’s frame up to two times. This will stretch the vinyl to its maximum length, making it nice and tight. We highly recommend you wrap the vinyl straps at least two times.
Step 8: After wrapping your vinyl strap, use another rivet to attach the strap to the hole on the frame. Do this with all of the other vinyl straps that were soaked in boiling water. This process will be time-consuming and repetitive, but it’s incredibly simple.
These are the basics of repairing sagging vinyl chairs. Each piece of furniture will vary greatly, so your mileage may vary. Always be sure to read all of the manufacturer’s guidelines and instructions before beginning any project!
How Do I Fix a Sagging Mesh Patio Chair?
Fixing a mesh patio chair is much like fixing a vinyl variety. However, fixing mesh patio chairs is less intensive than their vinyl counterparts.
This process is incredibly DIY-friendly and shouldn’t take more than an afternoon. However, all products will differ, so it’s best to review any manufacturer instructions and guidelines before beginning.
Here are some tools you might need before beginning:
- Mesh sling
- Heavy-duty fabric scissors
- Measuring tape
- Gloves & safety equipment
Step-by-step Guide on Fixing Sagging Mesh Patio Chairs
Step 1: First, start by measuring the length, width, and height of your chair. To do so, you can use a regular or cloth measuring tape. Be sure to get accurate measurements to avoid headaches down the line.
Step 2: From there, you can get a new sling based on the measurements. You can order slings online (on Amazon) at affordable prices! Different manufacturers will have varying best use cases. For that reason, always be sure to read all the guidelines and instructions before beginning!
Step 3: Now that you have your new mesh sling, it’s time to cut it out according to your measurements. To do so, use a pair of heavy-duty fabric scissors (on Amazon). Be sure you have accurate measurements to avoid headaches down the line. You may even want to consider using a few practice cuts to ensure you have the correct measurements.
Step 4: From there, you can remove the old sling from the chair. You may also need to remove any spreader bars. To do so, simply follow your manufacturer’s instructions and guidelines. Now is also a good time to repaint or refinish your patio chair. Any repairs or revisions should be made at this step. These repairs can include applying sealants, finishes, or simply cleaning your chair.
Step 5: From there, you can start to follow the instructions to attach the mesh sling to your chair. Each chair and mesh sling will have different requirements, so it’s best to read all manufacturer instructions and guidelines. You may need to wear gloves during this process or have someone help you.
Step 6: Finally, you can cut and remove any excess mesh or material. To do so, you can use a pair of heavy-duty fabric cutters or some sort of saw. Be sure to sand down any sharp edges to avoid potential accidents down the line.
These are the basics of repairing sagging mesh chairs. Each piece of furniture will vary greatly, so your mileage may vary. Always be sure to read all of the manufacturer’s guidelines and instructions before beginning any project!
What Patio Furniture Will Last Outside Without Sagging?
As stated earlier, all materials are different. Outdoor furniture face the brunt of nature’s elements, accruing damage over time. Most patio furniture will begin to sag and weather over time. However, some products are better than others.
Zero Gravity Chairs
Zero Gravity Chairs (on Amazon) are an excellent outdoor furniture option. These products are built with outdoor use in mind and are incredibly robust. Zero Gravity Chairs use breathable material, ensuring the highest levels of comfort on even the hottest days!
With heavy-duty frames and water-resistant fabric, these chairs can withstand just about any weather. On top of that, these chairs are easily portable, have detachable features, and are easy to fix! You can find cord replacements on Amazon for incredibly affordable prices.
Teak Wood Furniture Sets
Teak wood is another excellent outdoor furniture variety. Teak wood is incredibly durable, robust, and naturally moisture-resistant. Products like TeakCraft Folding Arm Chair (on Amazon) can withstand harsh climates and conditions. Teak products are excellent for anyone looking to avoid saggy patio furniture.
Plastic Furniture Sets
Although plastic furniture sets aren’t recommended, they definitely won’t sag! Plastic furniture sets can be an excellent entry point for someone looking to spruce up their patio. However, plastic furniture isn’t durable and is prone to cracking.
Wicker Furniture Sets
Wicker furniture sets, such as this one by Tangkula (on Amazon), are another fantastic choice for outdoor chairs. Although the cushions might sag with time, wicker furniture requires little maintenance.
You can simply rinse and wash wicker furniture with a damp rag. Wicker furniture can also be quickly reinforced with plywood and other materials.
These are just a few of the outdoor furniture materials that are less likely to sag. Sagging patio chairs happens over time and is a natural occurrence. Wear and tear from the natural elements result in saggy chairs. However, you can quickly fix and prevent sagging patio chairs.
How Can I Fix Sagging Patio Cushions?
Sagging patio cushions are a common occurrence. Patio cushions are usually the first part to deteriorate and accrue damages over time. Luckily, replacing and fixing sagging patio cushions is incredibly easy.
Find Out What Materials Are Inside of Your Cushions
First, you’ll need to figure out the material in your cushions. Typically, this will be foam. You may have to unzip your cushion or tear a seam to access the insides. Once you figure out what material is inside your pillow, you can purchase replacements and take measurements.
You can find different outdoor foam (on Amazon) varieties online, varying in price. Alternatively, you can purchase foam and other materials from your local fabric store. Buying locally might be a good option if you’re considering changing the type of material within your cushions.
Replace the Insides of Your Cushions
Next, you’ll want to replace the inside of your cushions with your new product. Measure and cut out your new stiffer foam. To do so, you can use a fabric pen and ruler to mark out your measurements. Consider using a track saw or other type of blade to cut through your foam.
Afterward, simply replace the inside as you would normally. You should also consider using a spray adhesive. A spray adhesive will ensure you have an easier time replacing the cushion and locking it in place. However, this step is not necessary.
Zip or Sew Back Up Your Cushions
Finally, you’ll want to zip or sew up your cushion. Before doing so, you should wash and take care of any stains that might have built up over time. Most removable coverings can be thrown in the washing machine.
However, for the best results, be sure to read all manufacturer instructions and guidelines before washing.
Sagging patio chairs don’t have to be a common occurrence anymore. The skills, knowledge, and tips from this article will have you repairing your outdoor furniture with ease!
Remember to take preventative measures early on to ensure the longevity of your furniture. Additionally, you can reinforce furniture that needs some extra TLC. Each piece of furniture will vary and require different protocols. As always, be sure to check with the manufacturer before beginning any project!